Traditional GRC Jali in Surat
Mughal, Rajput and Islamic-geometry jaali motifs reproduced in lightweight GRC. Manufactured by Asian GRC and supplied across Surat, Gujarat.
- Price
- ₹300–₹550 / sq ft + GST (reviewed October 2026)
- Thickness
- 30–50 mm
- Material
- GRC / GFRC with alkali-resistant glass fibre
- Delivery to Surat
- ~1,150 km from Gurugram; 4–6 days in transit
- Google rating
- ★ 4.9/5 from 73 reviews
- GSTIN
- 06ADCPI2643A1ZA
- In business since
- 2012
About Traditional GRC Jali in Surat
Traditional GRC jali reproduces the motifs of carved stone jaalis — star-and-polygon geometry, floral trellis, quatrefoil (Moroccan) lattice and arch-framed panels — using moulds taken from carved masters.
Hand-carved sandstone or marble jaali is slow to make and heavy to fix. A GRC jali of the same design weighs far less, is cast to repeatable dimensions, and can be finished in a sandstone-look pigment or kept white like marble. It suits heritage-style buildings where the look matters but the budget and structure cannot take carved stone.
Asian GRC manufactures Traditional GRC Jali in Gurugram and supplies homeowners, builders, architects and contractors across Surat and the rest of Gujarat. Every panel is factory-cast from glass-fibre reinforced concrete, so you get the look of carved stone at a fraction of its weight, with nothing inside that can rust.
Traditional GRC Jali price in Surat (2026)
Traditional GRC Jali costs ₹300–₹550 per sq ft in Surat, before GST. The table below lists current rates for our full GRC range so you can compare options for the same project.
| Product | Thickness | Price (₹/sq ft) |
|---|---|---|
| GRC Jali | 25–50 mm | ₹250–₹450 |
| Modern GRC Jali | 30–50 mm | ₹280–₹480 |
| Traditional GRC Jali | 30–50 mm | ₹300–₹550 |
| 3D GRC Jali | 50–100 mm | ₹350–₹650 |
| Customized GRC Jali | 25–60 mm | ₹350–₹700 |
| Precast GRC Jali | 25–50 mm | ₹250–₹450 |
| GRC Balcony Jali | 30–50 mm | ₹250–₹450 |
| GRC Boundary Wall Jali | 40–50 mm | ₹220–₹400 |
| GRC Partition Jali | 25–40 mm | ₹300–₹550 |
| GRC Cladding Jali | 30–50 mm | ₹300–₹550 |
| GRC Elevation Screens | 30–50 mm | ₹280–₹500 |
| GRC Screen Panels | 25–50 mm | ₹280–₹500 |
| Decorative GRC Screens | 25–40 mm | ₹300–₹550 |
| GRC Decorative Panels | 15–25 mm | ₹300–₹600 |
| GRC Wall Panels | 12–20 mm | ₹250–₹500 |
| Architectural GRC Facade | 10–15 mm | ₹500–₹1,200 |
Ex-works indicative rates before GST. Your final rate depends on the pattern and mould (standard or custom), thickness, quantity, finish and sealer, freight to Surat, and whether installation and steel frames are included. Send your sizes or drawings for an exact quote.
Specifications
| Material | Glass-fibre reinforced concrete (GRC / GFRC): cement, fine silica sand, alkali-resistant (AR) glass fibre, polymer curing admixture |
|---|---|
| Glass fibre | AR glass with ≥ 16% zirconia (ZrO₂); about 2–3.5% by weight in premix, 4–5% in spray-up GRC |
| Thickness | 30–50 mm |
| Weight (approx.) | ≈ 3.6–6.0 kg/sq ft at ~35% open area |
| Panel / module size | 600 × 600 mm to 1200 × 1800 mm; arched and jharokha-shaped panels to drawing |
| Density | ≈ 1.9–2.1 t/m³ |
| Flexural strength | Typically 10–14 MPa (premix) and 20–30 MPa (spray-up) at 28 days, tested to EN 1170-5 |
| Compressive strength | Typically 50–80 MPa |
| Fire | Non-combustible — no organic binder or resin |
| Finish | White (marble look), sandstone-pigmented (pink, red or beige), or painted |
| Patterns | Mughal geometric, floral trellis, quatrefoil, arch-framed and jharokha |
| Fixing | Stainless or galvanised steel dowels/anchors into RCC or masonry, or MS/SS frames; flexible sealant or polymer mortar at joints |
Strength values are typical for GRC made to the GRCA specification and EN 15191 performance classes. Ask for test data for your project.
Where Traditional GRC Jali is used
- Temples, gurudwaras, mosques and dargahs
- Heritage hotels, resorts and havelis
- Farmhouses and courtyard houses
- Pooja rooms and entrance foyers
- Garden pavilions and chhatris
Typical buyers in Surat include homeowners and builders, architects and interior designers, hotels and hospitals, schools and institutions, and religious trusts.
Traditional GRC Jali for Surat: climate, delivery and areas served
Specifying Traditional GRC Jali for Surat's climate
Surat is a coastal city: humid most of the year, with salt-laden sea air and a heavy south-west monsoon.
- Salt air is what destroys RCC jalis on the coast — chlorides reach the steel, it rusts and the concrete spalls. GRC jali has no steel reinforcement, so this failure mode does not exist.
- Specify stainless steel (SS 304, or SS 316 for sea-facing walls) or hot-dip galvanised anchors and frames — ordinary MS fixings are the weak point near the sea.
- Apply a breathable silane–siloxane water repellent after installation to reduce water uptake, staining and algae.
- Seal panel joints with a flexible PU or MS-polymer sealant and detail drip edges on horizontal tops before the monsoon.
Delivery to Surat
Panels are produced and dispatched from Gurugram, about 1,150 km by road from Surat. Production takes 15–30 working days after drawing approval; road transit is typically 4–6 days.
Areas we supply in Surat
- Vesu
- Adajan
- Pal
- Piplod
- Althan
- Citylight
- Dumas Road
- Varachha
- Katargam
- Sachin
— and anywhere else in Surat and nearby towns in Gujarat.
GRC vs stone, FRP and RCC jali
| GRC | Natural stone | FRP | RCC / cement | |
|---|---|---|---|---|
| Typical section | 25–50 mm | 50–75 mm | 3–6 mm skin | 50–75 mm |
| Reinforcement | AR glass fibre — nothing to rust | None | Glass fibre in resin | Steel bars — can rust and spall |
| Weight | Light | Heavy | Very light | Heavy |
| Fire | Non-combustible | Non-combustible | Combustible unless fire-retardant resin is used | Non-combustible |
| Sun / UV | Stable; colour runs through the body | Stable; may erode or stain | Resin can yellow and chalk without UV-stable gelcoat | Stable, but cracks where steel corrodes |
| Detail & repeatability | Fine detail, every panel identical | Fine, but hand-carved, slow and costly | Fine | Coarse |
Traditional GRC Jali designs
How to order Traditional GRC Jali in Surat
- Share your requirement Send opening sizes (or drawings / site photos) and the design you like on WhatsApp or by phone.
- Design & quotation We fit standard modules or draw a custom layout, and quote per sq ft with freight to Surat.
- Approval You approve the panel layout drawing and design before production starts.
- Production Panels are cast and cured in the factory: 15–30 working days after drawing approval.
- Dispatch & installation Delivered to your site in Surat and fixed with stainless or galvanised anchors.
What our customers say
Traditional GRC Jali in Surat: FAQs
What is the price of Traditional GRC Jali in Surat?
Traditional GRC Jali costs about ₹300–₹550 per sq ft plus GST (rates reviewed October 2026). The exact rate depends on the design, thickness (30–50 mm), quantity, finish, freight to Surat and installation.
How thick and heavy is Traditional GRC Jali?
Our Traditional GRC Jali is 30–50 mm thick and weighs ≈ 3.6–6.0 kg/sq ft, far lighter than a stone or RCC jali of the same strength.
How long does delivery to Surat take?
Production takes 15–30 working days after drawing approval. Surat is about 1,150 km by road from our Gurugram base, so transit is typically 4–6 days.
Do you provide installation in Surat?
Yes. We provide supply and installation across Surat, and share fixing (anchor / frame) details with your contractor before dispatch.
Is GRC jali suitable for Surat's weather?
Yes. Surat is a coastal city: humid most of the year, with salt-laden sea air and a heavy south-west monsoon. Salt air is what destroys RCC jalis on the coast — chlorides reach the steel, it rusts and the concrete spalls. GRC jali has no steel reinforcement, so this failure mode does not exist.
What is GRC / GFRC made of?
Glass-fibre reinforced concrete is a mix of cement, fine silica sand, water and admixtures reinforced with alkali-resistant glass fibre. The fibre gives it tensile and flexural strength without steel, so sections can be thin and nothing rusts.
How do I get a quote for Traditional GRC Jali in Surat?
Send the opening sizes (width × height), quantity, a photo or drawing of the location and the design you like on WhatsApp to +91 98130 29009. We reply with a per-sq-ft quote including freight to Surat.
Can GRC jali be made to look like red or pink sandstone?
Yes. Mineral pigments are added to the mix so the colour runs through the whole section, then a light sand-blast exposes a stone-like texture.
Traditional GRC Jali in nearby cities
- Traditional GRC Jali in Vadodara
- Traditional GRC Jali in Nashik
- Traditional GRC Jali in Ahmedabad
- Traditional GRC Jali in Thane
- Traditional GRC Jali in Mumbai
- Traditional GRC Jali in Navi Mumbai
- Traditional GRC Jali in Rajkot
- Traditional GRC Jali in Pune
All GRC products in Surat → All cities we serve →
Get a Traditional GRC Jali quote in Surat
Tell us the sizes and design and get a written quote for Traditional GRC Jali in Surat.
Asian GRC · 65, Siris Rd, DLF Phase 3, Sector 24, Gurugram, Haryana 122002