GRC Wall Panels in Rajkot
Thin, lightweight GRC cladding panels with stone, concrete, wood-grain or 3D textures. Manufactured by Asian GRC and supplied across Rajkot, Gujarat.
- Price
- ₹250–₹500 / sq ft + GST (reviewed October 2026)
- Thickness
- 12–20 mm
- Material
- GRC / GFRC with alkali-resistant glass fibre
- Delivery to Rajkot
- ~1,170 km from Gurugram; 4–6 days in transit
- Google rating
- ★ 4.9/5 from 73 reviews
- GSTIN
- 06ADCPI2643A1ZA
- In business since
- 2012
About GRC Wall Panels in Rajkot
GRC wall panels are thin cladding panels that give a wall the look of stone, board-formed concrete, wood grain or a 3D texture, inside or outside.
At around 12–20 mm they weigh a fraction of natural stone cladding, so they suit upper floors and retrofits where adding dead load is a concern. They can be fixed with concealed anchors or adhesive-plus-mechanical fixing depending on height and exposure.
Asian GRC manufactures GRC Wall Panels in Gurugram and supplies homeowners, builders, architects and contractors across Rajkot and the rest of Gujarat. Every panel is factory-cast from glass-fibre reinforced concrete, so you get the look of carved stone at a fraction of its weight, with nothing inside that can rust.
GRC Wall Panels price in Rajkot (2026)
GRC Wall Panels costs ₹250–₹500 per sq ft in Rajkot, before GST. The table below lists current rates for our full GRC range so you can compare options for the same project.
| Product | Thickness | Price (₹/sq ft) |
|---|---|---|
| GRC Jali | 25–50 mm | ₹250–₹450 |
| Modern GRC Jali | 30–50 mm | ₹280–₹480 |
| Traditional GRC Jali | 30–50 mm | ₹300–₹550 |
| 3D GRC Jali | 50–100 mm | ₹350–₹650 |
| Customized GRC Jali | 25–60 mm | ₹350–₹700 |
| Precast GRC Jali | 25–50 mm | ₹250–₹450 |
| GRC Balcony Jali | 30–50 mm | ₹250–₹450 |
| GRC Boundary Wall Jali | 40–50 mm | ₹220–₹400 |
| GRC Partition Jali | 25–40 mm | ₹300–₹550 |
| GRC Cladding Jali | 30–50 mm | ₹300–₹550 |
| GRC Elevation Screens | 30–50 mm | ₹280–₹500 |
| GRC Screen Panels | 25–50 mm | ₹280–₹500 |
| Decorative GRC Screens | 25–40 mm | ₹300–₹550 |
| GRC Decorative Panels | 15–25 mm | ₹300–₹600 |
| GRC Wall Panels | 12–20 mm | ₹250–₹500 |
| Architectural GRC Facade | 10–15 mm | ₹500–₹1,200 |
Ex-works indicative rates before GST. Your final rate depends on the pattern and mould (standard or custom), thickness, quantity, finish and sealer, freight to Rajkot, and whether installation and steel frames are included. Send your sizes or drawings for an exact quote.
Specifications
| Material | Glass-fibre reinforced concrete (GRC / GFRC): cement, fine silica sand, alkali-resistant (AR) glass fibre, polymer curing admixture |
|---|---|
| Glass fibre | AR glass with ≥ 16% zirconia (ZrO₂); about 2–3.5% by weight in premix, 4–5% in spray-up GRC |
| Thickness | 12–20 mm |
| Weight (approx.) | ≈ 2.2–3.7 kg/sq ft |
| Panel / module size | 600 × 600 mm to 1200 × 2400 mm |
| Density | ≈ 1.9–2.1 t/m³ |
| Flexural strength | Typically 10–14 MPa (premix) and 20–30 MPa (spray-up) at 28 days, tested to EN 1170-5 |
| Compressive strength | Typically 50–80 MPa |
| Fire | Non-combustible — no organic binder or resin |
| Finish | Stone, concrete, wood-grain or 3D texture; pigmented or painted |
| Patterns | Textured and 3D wall designs |
| Fixing | Stainless or galvanised steel dowels/anchors into RCC or masonry, or MS/SS frames; flexible sealant or polymer mortar at joints |
Strength values are typical for GRC made to the GRCA specification and EN 15191 performance classes. Ask for test data for your project.
Where GRC Wall Panels is used
- Exterior facade cladding
- Interior feature walls
- Columns and fascia
- Retrofit over existing plaster
Typical buyers in Rajkot include homeowners and builders, architects and interior designers, hotels and hospitals, schools and institutions, and religious trusts.
GRC Wall Panels for Rajkot: climate, delivery and areas served
Specifying GRC Wall Panels for Rajkot's climate
Rajkot has a hot, semi-arid climate — intense sun, dust, rainfall packed into a short monsoon, and large day–night temperature swings.
- This is the climate the jaali was developed for: a perforated screen shades the wall and glazing behind it while still letting air through.
- Daily heating and cooling makes panels expand and contract, so leave movement joints of about 6–10 mm between panels and use flexible sealant rather than rigid mortar at the perimeter.
- Light colours (white or pale pigment) reflect more heat and show less dust than dark ones.
- Factory pigment in the mix does not chalk or peel in UV the way site-applied paint can.
Delivery to Rajkot
Panels are produced and dispatched from Gurugram, about 1,170 km by road from Rajkot. Production takes 15–30 working days after drawing approval; road transit is typically 4–6 days.
Areas we supply in Rajkot
- Kalawad Road
- 150 Feet Ring Road
- University Road
- Mavdi
- Raiya Road
- Metoda GIDC
— and anywhere else in Rajkot and nearby towns in Gujarat.
GRC vs stone, FRP and RCC jali
| GRC | Natural stone | FRP | RCC / cement | |
|---|---|---|---|---|
| Typical section | 25–50 mm | 50–75 mm | 3–6 mm skin | 50–75 mm |
| Reinforcement | AR glass fibre — nothing to rust | None | Glass fibre in resin | Steel bars — can rust and spall |
| Weight | Light | Heavy | Very light | Heavy |
| Fire | Non-combustible | Non-combustible | Combustible unless fire-retardant resin is used | Non-combustible |
| Sun / UV | Stable; colour runs through the body | Stable; may erode or stain | Resin can yellow and chalk without UV-stable gelcoat | Stable, but cracks where steel corrodes |
| Detail & repeatability | Fine detail, every panel identical | Fine, but hand-carved, slow and costly | Fine | Coarse |
GRC Wall Panels designs


How to order GRC Wall Panels in Rajkot
- Share your requirement Send opening sizes (or drawings / site photos) and the design you like on WhatsApp or by phone.
- Design & quotation We fit standard modules or draw a custom layout, and quote per sq ft with freight to Rajkot.
- Approval You approve the panel layout drawing and design before production starts.
- Production Panels are cast and cured in the factory: 15–30 working days after drawing approval.
- Dispatch & installation Delivered to your site in Rajkot and fixed with stainless or galvanised anchors.
What our customers say
GRC Wall Panels in Rajkot: FAQs
What is the price of GRC Wall Panels in Rajkot?
GRC Wall Panels costs about ₹250–₹500 per sq ft plus GST (rates reviewed October 2026). The exact rate depends on the design, thickness (12–20 mm), quantity, finish, freight to Rajkot and installation.
How thick and heavy is GRC Wall Panels?
Our GRC Wall Panels is 12–20 mm thick and weighs ≈ 2.2–3.7 kg/sq ft, far lighter than a stone or RCC jali of the same strength.
How long does delivery to Rajkot take?
Production takes 15–30 working days after drawing approval. Rajkot is about 1,170 km by road from our Gurugram base, so transit is typically 4–6 days.
Do you provide installation in Rajkot?
Yes. We provide supply and installation across Rajkot, and share fixing (anchor / frame) details with your contractor before dispatch.
Is GRC jali suitable for Rajkot's weather?
Yes. Rajkot has a hot, semi-arid climate — intense sun, dust, rainfall packed into a short monsoon, and large day–night temperature swings. This is the climate the jaali was developed for: a perforated screen shades the wall and glazing behind it while still letting air through.
What is GRC / GFRC made of?
Glass-fibre reinforced concrete is a mix of cement, fine silica sand, water and admixtures reinforced with alkali-resistant glass fibre. The fibre gives it tensile and flexural strength without steel, so sections can be thin and nothing rusts.
How do I get a quote for GRC Wall Panels in Rajkot?
Send the opening sizes (width × height), quantity, a photo or drawing of the location and the design you like on WhatsApp to +91 98130 29009. We reply with a per-sq-ft quote including freight to Rajkot.
Are GRC wall panels suitable for exterior walls?
Yes. Use mechanical (anchor) fixing above ground-floor height and a breathable water-repellent sealer on exposed faces.
GRC Wall Panels in nearby cities
- GRC Wall Panels in Ahmedabad
- GRC Wall Panels in Surat
- GRC Wall Panels in Vadodara
- GRC Wall Panels in Udaipur
- GRC Wall Panels in Nashik
- GRC Wall Panels in Thane
- GRC Wall Panels in Mumbai
- GRC Wall Panels in Navi Mumbai
All GRC products in Rajkot → All cities we serve →
Get a GRC Wall Panels quote in Rajkot
Tell us the sizes and design and get a written quote for GRC Wall Panels in Rajkot.
Asian GRC · 65, Siris Rd, DLF Phase 3, Sector 24, Gurugram, Haryana 122002
