GRC Jali in Thane
Perforated glass-fibre reinforced concrete screens for elevations, balconies, boundary walls and interiors. Manufactured by Asian GRC and supplied across Thane, Maharashtra.
- Price
- ₹250–₹450 / sq ft + GST (reviewed October 2026)
- Thickness
- 25–50 mm
- Material
- GRC / GFRC with alkali-resistant glass fibre
- Delivery to Thane
- ~1,390 km from Gurugram; 4–6 days in transit
- Google rating
- ★ 4.9/5 from 73 reviews
- GSTIN
- 06ADCPI2643A1ZA
- In business since
- 2012
About GRC Jali in Thane
GRC jali is a perforated screen cast from glass-fibre reinforced concrete — cement, fine silica sand and alkali-resistant glass fibre. It does the job a carved stone jaali has always done in Indian buildings: it filters sunlight, keeps air moving and gives privacy, but at a fraction of the weight and in sections thin enough to fix to an ordinary RCC or brick frame.
Because the fibres, not steel bars, carry the tension, a GRC jali has no reinforcement to rust and no cover concrete to spall. That is why it holds its edges and pattern detail for decades on exposed elevations, where RCC jalis crack and FRP jalis fade and chalk in the sun.
Asian GRC manufactures GRC Jali in Gurugram and supplies homeowners, builders, architects and contractors across Thane and the rest of Maharashtra. Every panel is factory-cast from glass-fibre reinforced concrete, so you get the look of carved stone at a fraction of its weight, with nothing inside that can rust.
GRC Jali price in Thane (2026)
GRC Jali costs ₹250–₹450 per sq ft in Thane, before GST. The table below lists current rates for our full GRC range so you can compare options for the same project.
| Product | Thickness | Price (₹/sq ft) |
|---|---|---|
| GRC Jali | 25–50 mm | ₹250–₹450 |
| Modern GRC Jali | 30–50 mm | ₹280–₹480 |
| Traditional GRC Jali | 30–50 mm | ₹300–₹550 |
| 3D GRC Jali | 50–100 mm | ₹350–₹650 |
| Customized GRC Jali | 25–60 mm | ₹350–₹700 |
| Precast GRC Jali | 25–50 mm | ₹250–₹450 |
| GRC Balcony Jali | 30–50 mm | ₹250–₹450 |
| GRC Boundary Wall Jali | 40–50 mm | ₹220–₹400 |
| GRC Partition Jali | 25–40 mm | ₹300–₹550 |
| GRC Cladding Jali | 30–50 mm | ₹300–₹550 |
| GRC Elevation Screens | 30–50 mm | ₹280–₹500 |
| GRC Screen Panels | 25–50 mm | ₹280–₹500 |
| Decorative GRC Screens | 25–40 mm | ₹300–₹550 |
| GRC Decorative Panels | 15–25 mm | ₹300–₹600 |
| GRC Wall Panels | 12–20 mm | ₹250–₹500 |
| Architectural GRC Facade | 10–15 mm | ₹500–₹1,200 |
Ex-works indicative rates before GST. Your final rate depends on the pattern and mould (standard or custom), thickness, quantity, finish and sealer, freight to Thane, and whether installation and steel frames are included. Send your sizes or drawings for an exact quote.
Specifications
| Material | Glass-fibre reinforced concrete (GRC / GFRC): cement, fine silica sand, alkali-resistant (AR) glass fibre, polymer curing admixture |
|---|---|
| Glass fibre | AR glass with ≥ 16% zirconia (ZrO₂); about 2–3.5% by weight in premix, 4–5% in spray-up GRC |
| Thickness | 25–50 mm |
| Weight (approx.) | ≈ 3.0–6.0 kg/sq ft at ~35% open area |
| Panel / module size | 600 × 600 mm to 1200 × 1800 mm (2′ × 2′ to 4′ × 6′); larger on request |
| Density | ≈ 1.9–2.1 t/m³ |
| Flexural strength | Typically 10–14 MPa (premix) and 20–30 MPa (spray-up) at 28 days, tested to EN 1170-5 |
| Compressive strength | Typically 50–80 MPa |
| Fire | Non-combustible — no organic binder or resin |
| Finish | Natural grey, white cement, or factory-pigmented; optional acrylic or textured paint |
| Patterns | Geometric, floral, Mughal, Moroccan, linear and custom CAD patterns |
| Fixing | Stainless or galvanised steel dowels/anchors into RCC or masonry, or MS/SS frames; flexible sealant or polymer mortar at joints |
Strength values are typical for GRC made to the GRCA specification and EN 15191 performance classes. Ask for test data for your project.
Where GRC Jali is used
- Front elevations and staircase shafts
- Balcony and terrace screens
- Boundary and compound walls
- Covering AC units, ducts and service shafts
- Interior partitions and feature walls
Typical buyers in Thane include homeowners and builders, architects and interior designers, hotels and hospitals, schools and institutions, and religious trusts.
GRC Jali for Thane: climate, delivery and areas served
Specifying GRC Jali for Thane's climate
Thane is a coastal city: humid most of the year, with salt-laden sea air and a heavy south-west monsoon.
- Salt air is what destroys RCC jalis on the coast — chlorides reach the steel, it rusts and the concrete spalls. GRC jali has no steel reinforcement, so this failure mode does not exist.
- Specify stainless steel (SS 304, or SS 316 for sea-facing walls) or hot-dip galvanised anchors and frames — ordinary MS fixings are the weak point near the sea.
- Apply a breathable silane–siloxane water repellent after installation to reduce water uptake, staining and algae.
- Seal panel joints with a flexible PU or MS-polymer sealant and detail drip edges on horizontal tops before the monsoon.
Delivery to Thane
Panels are produced and dispatched from Gurugram, about 1,390 km by road from Thane. Production takes 15–30 working days after drawing approval; road transit is typically 4–6 days.
Areas we supply in Thane
- Ghodbunder Road
- Majiwada
- Kolshet
- Hiranandani Estate
- Wagle Estate
- Kasarvadavali
- Balkum
— and anywhere else in Thane and nearby towns in Maharashtra.
GRC vs stone, FRP and RCC jali
| GRC | Natural stone | FRP | RCC / cement | |
|---|---|---|---|---|
| Typical section | 25–50 mm | 50–75 mm | 3–6 mm skin | 50–75 mm |
| Reinforcement | AR glass fibre — nothing to rust | None | Glass fibre in resin | Steel bars — can rust and spall |
| Weight | Light | Heavy | Very light | Heavy |
| Fire | Non-combustible | Non-combustible | Combustible unless fire-retardant resin is used | Non-combustible |
| Sun / UV | Stable; colour runs through the body | Stable; may erode or stain | Resin can yellow and chalk without UV-stable gelcoat | Stable, but cracks where steel corrodes |
| Detail & repeatability | Fine detail, every panel identical | Fine, but hand-carved, slow and costly | Fine | Coarse |
GRC Jali designs
How to order GRC Jali in Thane
- Share your requirement Send opening sizes (or drawings / site photos) and the design you like on WhatsApp or by phone.
- Design & quotation We fit standard modules or draw a custom layout, and quote per sq ft with freight to Thane.
- Approval You approve the panel layout drawing and design before production starts.
- Production Panels are cast and cured in the factory: 15–30 working days after drawing approval.
- Dispatch & installation Delivered to your site in Thane and fixed with stainless or galvanised anchors.
What our customers say
GRC Jali in Thane: FAQs
What is the price of GRC Jali in Thane?
GRC Jali costs about ₹250–₹450 per sq ft plus GST (rates reviewed October 2026). The exact rate depends on the design, thickness (25–50 mm), quantity, finish, freight to Thane and installation.
How thick and heavy is GRC Jali?
Our GRC Jali is 25–50 mm thick and weighs ≈ 3.0–6.0 kg/sq ft, far lighter than a stone or RCC jali of the same strength.
How long does delivery to Thane take?
Production takes 15–30 working days after drawing approval. Thane is about 1,390 km by road from our Gurugram base, so transit is typically 4–6 days.
Do you provide installation in Thane?
Yes. We provide supply and installation across Thane, and share fixing (anchor / frame) details with your contractor before dispatch.
Is GRC jali suitable for Thane's weather?
Yes. Thane is a coastal city: humid most of the year, with salt-laden sea air and a heavy south-west monsoon. Salt air is what destroys RCC jalis on the coast — chlorides reach the steel, it rusts and the concrete spalls. GRC jali has no steel reinforcement, so this failure mode does not exist.
What is GRC / GFRC made of?
Glass-fibre reinforced concrete is a mix of cement, fine silica sand, water and admixtures reinforced with alkali-resistant glass fibre. The fibre gives it tensile and flexural strength without steel, so sections can be thin and nothing rusts.
How do I get a quote for GRC Jali in Thane?
Send the opening sizes (width × height), quantity, a photo or drawing of the location and the design you like on WhatsApp to +91 98130 29009. We reply with a per-sq-ft quote including freight to Thane.
Is GRC jali the same as cement jali?
No. A conventional cement or RCC jali relies on steel bars and thick sections. GRC jali uses alkali-resistant glass fibre spread through the mix, so it can be cast 25–50 mm thick with no steel to corrode.
GRC Jali in nearby cities
- GRC Jali in Mumbai
- GRC Jali in Navi Mumbai
- GRC Jali in Pune
- GRC Jali in Nashik
- GRC Jali in Surat
- GRC Jali in Vadodara
- GRC Jali in Rajkot
- GRC Jali in Ahmedabad
All GRC products in Thane → All cities we serve →
Get a GRC Jali quote in Thane
Tell us the sizes and design and get a written quote for GRC Jali in Thane.
Asian GRC · 65, Siris Rd, DLF Phase 3, Sector 24, Gurugram, Haryana 122002