GRC Jali in Bhubaneswar
Perforated glass-fibre reinforced concrete screens for elevations, balconies, boundary walls and interiors. Manufactured by Asian GRC and supplied across Bhubaneswar, Odisha.
- Price
- ₹250–₹450 / sq ft + GST (reviewed October 2026)
- Thickness
- 25–50 mm
- Material
- GRC / GFRC with alkali-resistant glass fibre
- Delivery to Bhubaneswar
- ~1,590 km from Gurugram; 4–6 days in transit
- Google rating
- ★ 4.9/5 from 73 reviews
- GSTIN
- 06ADCPI2643A1ZA
- In business since
- 2012
About GRC Jali in Bhubaneswar
GRC jali is a perforated screen cast from glass-fibre reinforced concrete — cement, fine silica sand and alkali-resistant glass fibre. It does the job a carved stone jaali has always done in Indian buildings: it filters sunlight, keeps air moving and gives privacy, but at a fraction of the weight and in sections thin enough to fix to an ordinary RCC or brick frame.
Because the fibres, not steel bars, carry the tension, a GRC jali has no reinforcement to rust and no cover concrete to spall. That is why it holds its edges and pattern detail for decades on exposed elevations, where RCC jalis crack and FRP jalis fade and chalk in the sun.
Asian GRC manufactures GRC Jali in Gurugram and supplies homeowners, builders, architects and contractors across Bhubaneswar and the rest of Odisha. Every panel is factory-cast from glass-fibre reinforced concrete, so you get the look of carved stone at a fraction of its weight, with nothing inside that can rust.
GRC Jali price in Bhubaneswar (2026)
GRC Jali costs ₹250–₹450 per sq ft in Bhubaneswar, before GST. The table below lists current rates for our full GRC range so you can compare options for the same project.
| Product | Thickness | Price (₹/sq ft) |
|---|---|---|
| GRC Jali | 25–50 mm | ₹250–₹450 |
| Modern GRC Jali | 30–50 mm | ₹280–₹480 |
| Traditional GRC Jali | 30–50 mm | ₹300–₹550 |
| 3D GRC Jali | 50–100 mm | ₹350–₹650 |
| Customized GRC Jali | 25–60 mm | ₹350–₹700 |
| Precast GRC Jali | 25–50 mm | ₹250–₹450 |
| GRC Balcony Jali | 30–50 mm | ₹250–₹450 |
| GRC Boundary Wall Jali | 40–50 mm | ₹220–₹400 |
| GRC Partition Jali | 25–40 mm | ₹300–₹550 |
| GRC Cladding Jali | 30–50 mm | ₹300–₹550 |
| GRC Elevation Screens | 30–50 mm | ₹280–₹500 |
| GRC Screen Panels | 25–50 mm | ₹280–₹500 |
| Decorative GRC Screens | 25–40 mm | ₹300–₹550 |
| GRC Decorative Panels | 15–25 mm | ₹300–₹600 |
| GRC Wall Panels | 12–20 mm | ₹250–₹500 |
| Architectural GRC Facade | 10–15 mm | ₹500–₹1,200 |
Ex-works indicative rates before GST. Your final rate depends on the pattern and mould (standard or custom), thickness, quantity, finish and sealer, freight to Bhubaneswar, and whether installation and steel frames are included. Send your sizes or drawings for an exact quote.
Specifications
| Material | Glass-fibre reinforced concrete (GRC / GFRC): cement, fine silica sand, alkali-resistant (AR) glass fibre, polymer curing admixture |
|---|---|
| Glass fibre | AR glass with ≥ 16% zirconia (ZrO₂); about 2–3.5% by weight in premix, 4–5% in spray-up GRC |
| Thickness | 25–50 mm |
| Weight (approx.) | ≈ 3.0–6.0 kg/sq ft at ~35% open area |
| Panel / module size | 600 × 600 mm to 1200 × 1800 mm (2′ × 2′ to 4′ × 6′); larger on request |
| Density | ≈ 1.9–2.1 t/m³ |
| Flexural strength | Typically 10–14 MPa (premix) and 20–30 MPa (spray-up) at 28 days, tested to EN 1170-5 |
| Compressive strength | Typically 50–80 MPa |
| Fire | Non-combustible — no organic binder or resin |
| Finish | Natural grey, white cement, or factory-pigmented; optional acrylic or textured paint |
| Patterns | Geometric, floral, Mughal, Moroccan, linear and custom CAD patterns |
| Fixing | Stainless or galvanised steel dowels/anchors into RCC or masonry, or MS/SS frames; flexible sealant or polymer mortar at joints |
Strength values are typical for GRC made to the GRCA specification and EN 15191 performance classes. Ask for test data for your project.
Where GRC Jali is used
- Front elevations and staircase shafts
- Balcony and terrace screens
- Boundary and compound walls
- Covering AC units, ducts and service shafts
- Interior partitions and feature walls
Typical buyers in Bhubaneswar include homeowners and builders, architects and interior designers, hotels and hospitals, schools and institutions, and religious trusts.
GRC Jali for Bhubaneswar: climate, delivery and areas served
Specifying GRC Jali for Bhubaneswar's climate
Bhubaneswar has hot, humid summers and a long, heavy monsoon.
- Long wet spells encourage algae and fungal growth on shaded faces; a silane–siloxane water repellent with an anti-fungal additive keeps panels cleaner.
- Slope or chamfer horizontal tops and add drip grooves so water does not sit on the jali.
- Use galvanised or stainless steel fixings; mild steel frames should be hot-dip galvanised, not just painted.
- Plan installation outside the peak monsoon months where possible so joints and sealers cure properly.
Delivery to Bhubaneswar
Panels are produced and dispatched from Gurugram, about 1,590 km by road from Bhubaneswar. Production takes 15–30 working days after drawing approval; road transit is typically 4–6 days.
Areas we supply in Bhubaneswar
- Patia
- Chandrasekharpur
- Saheed Nagar
- Jaydev Vihar
- Nayapalli
- Khandagiri
- Infocity
- Old Town
— and anywhere else in Bhubaneswar and nearby towns in Odisha.
GRC vs stone, FRP and RCC jali
| GRC | Natural stone | FRP | RCC / cement | |
|---|---|---|---|---|
| Typical section | 25–50 mm | 50–75 mm | 3–6 mm skin | 50–75 mm |
| Reinforcement | AR glass fibre — nothing to rust | None | Glass fibre in resin | Steel bars — can rust and spall |
| Weight | Light | Heavy | Very light | Heavy |
| Fire | Non-combustible | Non-combustible | Combustible unless fire-retardant resin is used | Non-combustible |
| Sun / UV | Stable; colour runs through the body | Stable; may erode or stain | Resin can yellow and chalk without UV-stable gelcoat | Stable, but cracks where steel corrodes |
| Detail & repeatability | Fine detail, every panel identical | Fine, but hand-carved, slow and costly | Fine | Coarse |
GRC Jali designs
How to order GRC Jali in Bhubaneswar
- Share your requirement Send opening sizes (or drawings / site photos) and the design you like on WhatsApp or by phone.
- Design & quotation We fit standard modules or draw a custom layout, and quote per sq ft with freight to Bhubaneswar.
- Approval You approve the panel layout drawing and design before production starts.
- Production Panels are cast and cured in the factory: 15–30 working days after drawing approval.
- Dispatch & installation Delivered to your site in Bhubaneswar and fixed with stainless or galvanised anchors.
What our customers say
GRC Jali in Bhubaneswar: FAQs
What is the price of GRC Jali in Bhubaneswar?
GRC Jali costs about ₹250–₹450 per sq ft plus GST (rates reviewed October 2026). The exact rate depends on the design, thickness (25–50 mm), quantity, finish, freight to Bhubaneswar and installation.
How thick and heavy is GRC Jali?
Our GRC Jali is 25–50 mm thick and weighs ≈ 3.0–6.0 kg/sq ft, far lighter than a stone or RCC jali of the same strength.
How long does delivery to Bhubaneswar take?
Production takes 15–30 working days after drawing approval. Bhubaneswar is about 1,590 km by road from our Gurugram base, so transit is typically 4–6 days.
Do you provide installation in Bhubaneswar?
Yes. We provide supply and installation across Bhubaneswar, and share fixing (anchor / frame) details with your contractor before dispatch.
Is GRC jali suitable for Bhubaneswar's weather?
Yes. Bhubaneswar has hot, humid summers and a long, heavy monsoon. Long wet spells encourage algae and fungal growth on shaded faces; a silane–siloxane water repellent with an anti-fungal additive keeps panels cleaner.
What is GRC / GFRC made of?
Glass-fibre reinforced concrete is a mix of cement, fine silica sand, water and admixtures reinforced with alkali-resistant glass fibre. The fibre gives it tensile and flexural strength without steel, so sections can be thin and nothing rusts.
How do I get a quote for GRC Jali in Bhubaneswar?
Send the opening sizes (width × height), quantity, a photo or drawing of the location and the design you like on WhatsApp to +91 98130 29009. We reply with a per-sq-ft quote including freight to Bhubaneswar.
Is GRC jali the same as cement jali?
No. A conventional cement or RCC jali relies on steel bars and thick sections. GRC jali uses alkali-resistant glass fibre spread through the mix, so it can be cast 25–50 mm thick with no steel to corrode.
GRC Jali in nearby cities
- GRC Jali in Ranchi
- GRC Jali in Kolkata
- GRC Jali in Visakhapatnam
- GRC Jali in Raipur
- GRC Jali in Patna
- GRC Jali in Varanasi
- GRC Jali in Prayagraj
- GRC Jali in Nagpur
All GRC products in Bhubaneswar → All cities we serve →
Get a GRC Jali quote in Bhubaneswar
Tell us the sizes and design and get a written quote for GRC Jali in Bhubaneswar.
Asian GRC · 65, Siris Rd, DLF Phase 3, Sector 24, Gurugram, Haryana 122002