GRC Decorative Panels in Chandigarh
Relief-moulded GRC panels — motifs, murals and textures for walls and facades. Manufactured by Asian GRC and supplied across Chandigarh, Chandigarh (UT).
- Price
- ₹300–₹600 / sq ft + GST (reviewed October 2026)
- Thickness
- 15–25 mm
- Material
- GRC / GFRC with alkali-resistant glass fibre
- Delivery to Chandigarh
- ~310 km from Gurugram; 1–2 days in transit
- Google rating
- ★ 4.9/5 from 73 reviews
- GSTIN
- 06ADCPI2643A1ZA
- In business since
- 2012
About GRC Decorative Panels in Chandigarh
GRC decorative panels are relief panels rather than perforated jali: carved motifs, murals, borders and textured surfaces cast in glass-fibre reinforced concrete.
They give the look of carved stone or plaster on exterior walls where plaster of Paris would not survive and stone would be too heavy. Panels are typically 15–25 mm thick at the face with ribs or a frame on the back, and fixed with concealed anchors.
Asian GRC manufactures GRC Decorative Panels in Gurugram and supplies homeowners, builders, architects and contractors across Chandigarh and the rest of Chandigarh (UT). Every panel is factory-cast from glass-fibre reinforced concrete, so you get the look of carved stone at a fraction of its weight, with nothing inside that can rust.
GRC Decorative Panels price in Chandigarh (2026)
GRC Decorative Panels costs ₹300–₹600 per sq ft in Chandigarh, before GST. The table below lists current rates for our full GRC range so you can compare options for the same project.
| Product | Thickness | Price (₹/sq ft) |
|---|---|---|
| GRC Jali | 25–50 mm | ₹250–₹450 |
| Modern GRC Jali | 30–50 mm | ₹280–₹480 |
| Traditional GRC Jali | 30–50 mm | ₹300–₹550 |
| 3D GRC Jali | 50–100 mm | ₹350–₹650 |
| Customized GRC Jali | 25–60 mm | ₹350–₹700 |
| Precast GRC Jali | 25–50 mm | ₹250–₹450 |
| GRC Balcony Jali | 30–50 mm | ₹250–₹450 |
| GRC Boundary Wall Jali | 40–50 mm | ₹220–₹400 |
| GRC Partition Jali | 25–40 mm | ₹300–₹550 |
| GRC Cladding Jali | 30–50 mm | ₹300–₹550 |
| GRC Elevation Screens | 30–50 mm | ₹280–₹500 |
| GRC Screen Panels | 25–50 mm | ₹280–₹500 |
| Decorative GRC Screens | 25–40 mm | ₹300–₹550 |
| GRC Decorative Panels | 15–25 mm | ₹300–₹600 |
| GRC Wall Panels | 12–20 mm | ₹250–₹500 |
| Architectural GRC Facade | 10–15 mm | ₹500–₹1,200 |
Ex-works indicative rates before GST. Your final rate depends on the pattern and mould (standard or custom), thickness, quantity, finish and sealer, freight to Chandigarh, and whether installation and steel frames are included. Send your sizes or drawings for an exact quote.
Specifications
| Material | Glass-fibre reinforced concrete (GRC / GFRC): cement, fine silica sand, alkali-resistant (AR) glass fibre, polymer curing admixture |
|---|---|
| Glass fibre | AR glass with ≥ 16% zirconia (ZrO₂); about 2–3.5% by weight in premix, 4–5% in spray-up GRC |
| Thickness | 15–25 mm |
| Weight (approx.) | ≈ 2.8–4.6 kg/sq ft |
| Panel / module size | 600 × 600 mm to 1200 × 2400 mm |
| Density | ≈ 1.9–2.1 t/m³ |
| Flexural strength | Typically 10–14 MPa (premix) and 20–30 MPa (spray-up) at 28 days, tested to EN 1170-5 |
| Compressive strength | Typically 50–80 MPa |
| Fire | Non-combustible — no organic binder or resin |
| Finish | White, stone-look pigment, painted or metallic |
| Patterns | Floral relief, geometric relief, murals and custom |
| Fixing | Stainless or galvanised steel dowels/anchors into RCC or masonry, or MS/SS frames; flexible sealant or polymer mortar at joints |
Strength values are typical for GRC made to the GRCA specification and EN 15191 performance classes. Ask for test data for your project.
Where GRC Decorative Panels is used
- Feature walls and facades
- Temple and gurudwara walls
- Hotel lobbies and banquet halls
- Column capitals, friezes and borders
Typical buyers in Chandigarh include homeowners and builders, architects and interior designers, hotels and hospitals, schools and institutions, and religious trusts.
GRC Decorative Panels for Chandigarh: climate, delivery and areas served
Chandigarh's modernist buildings made the perforated screen a city signature — Le Corbusier's concrete brise-soleil and the brick jali walls of Pierre Jeanneret's government housing.
Specifying GRC Decorative Panels for Chandigarh's climate
Chandigarh has a composite climate: very hot, dry summers, a monsoon season, and cool to cold winters.
- Summer surface temperatures on west walls get very high; a GRC jali standing 50–75 mm off the wall shades it and lets the hot air between escape.
- With hot summers and cool winters panels move seasonally — use movement joints of about 6–10 mm and flexible sealant at the perimeter.
- Apply a water-repellent sealer before the monsoon to limit staining and efflorescence.
- Dust storms are common before the monsoon; smoother finishes and lighter colours are easier to wash down.
Delivery to Chandigarh
Panels are produced and dispatched from Gurugram, about 310 km by road from Chandigarh. Production takes 15–30 working days after drawing approval; road transit is typically 1–2 days.
Areas we supply in Chandigarh
- Sector 8
- Sector 17
- Sector 35
- Manimajra
- Industrial Area Phase I & II
- Panchkula
- Zirakpur
- New Chandigarh
— and anywhere else in Chandigarh and nearby towns in Chandigarh (UT).
GRC vs stone, FRP and RCC jali
| GRC | Natural stone | FRP | RCC / cement | |
|---|---|---|---|---|
| Typical section | 25–50 mm | 50–75 mm | 3–6 mm skin | 50–75 mm |
| Reinforcement | AR glass fibre — nothing to rust | None | Glass fibre in resin | Steel bars — can rust and spall |
| Weight | Light | Heavy | Very light | Heavy |
| Fire | Non-combustible | Non-combustible | Combustible unless fire-retardant resin is used | Non-combustible |
| Sun / UV | Stable; colour runs through the body | Stable; may erode or stain | Resin can yellow and chalk without UV-stable gelcoat | Stable, but cracks where steel corrodes |
| Detail & repeatability | Fine detail, every panel identical | Fine, but hand-carved, slow and costly | Fine | Coarse |
GRC Decorative Panels designs


How to order GRC Decorative Panels in Chandigarh
- Share your requirement Send opening sizes (or drawings / site photos) and the design you like on WhatsApp or by phone.
- Design & quotation We fit standard modules or draw a custom layout, and quote per sq ft with freight to Chandigarh.
- Approval You approve the panel layout drawing and design before production starts.
- Production Panels are cast and cured in the factory: 15–30 working days after drawing approval.
- Dispatch & installation Delivered to your site in Chandigarh and fixed with stainless or galvanised anchors.
What our customers say
GRC Decorative Panels in Chandigarh: FAQs
What is the price of GRC Decorative Panels in Chandigarh?
GRC Decorative Panels costs about ₹300–₹600 per sq ft plus GST (rates reviewed October 2026). The exact rate depends on the design, thickness (15–25 mm), quantity, finish, freight to Chandigarh and installation.
How thick and heavy is GRC Decorative Panels?
Our GRC Decorative Panels is 15–25 mm thick and weighs ≈ 2.8–4.6 kg/sq ft, far lighter than a stone or RCC jali of the same strength.
How long does delivery to Chandigarh take?
Production takes 15–30 working days after drawing approval. Chandigarh is about 310 km by road from our Gurugram base, so transit is typically 1–2 days.
Do you provide installation in Chandigarh?
Yes. We provide supply and installation across Chandigarh, and share fixing (anchor / frame) details with your contractor before dispatch.
Is GRC jali suitable for Chandigarh's weather?
Yes. Chandigarh has a composite climate: very hot, dry summers, a monsoon season, and cool to cold winters. Summer surface temperatures on west walls get very high; a GRC jali standing 50–75 mm off the wall shades it and lets the hot air between escape.
What is GRC / GFRC made of?
Glass-fibre reinforced concrete is a mix of cement, fine silica sand, water and admixtures reinforced with alkali-resistant glass fibre. The fibre gives it tensile and flexural strength without steel, so sections can be thin and nothing rusts.
How do I get a quote for GRC Decorative Panels in Chandigarh?
Send the opening sizes (width × height), quantity, a photo or drawing of the location and the design you like on WhatsApp to +91 98130 29009. We reply with a per-sq-ft quote including freight to Chandigarh.
What is the difference between a GRC decorative panel and a GRC jali?
A jali is perforated — you can see and air can pass through it. A decorative panel is solid with a relief surface, used to clad a wall rather than screen an opening.
GRC Decorative Panels in nearby cities
- GRC Decorative Panels in Mohali
- GRC Decorative Panels in Ludhiana
- GRC Decorative Panels in Karnal
- GRC Decorative Panels in Dehradun
- GRC Decorative Panels in Panipat
- GRC Decorative Panels in Sonipat
- GRC Decorative Panels in Rohtak
- GRC Decorative Panels in Amritsar
All GRC products in Chandigarh → All cities we serve →
Get a GRC Decorative Panels quote in Chandigarh
Tell us the sizes and design and get a written quote for GRC Decorative Panels in Chandigarh.
Asian GRC · 65, Siris Rd, DLF Phase 3, Sector 24, Gurugram, Haryana 122002
